WinRAR 5.00 Beta 1: il celebre gestore di archivi compressi si aggiorna

Ecco il nuovissimo WinRAR 5.00 Beta 1 (x86/x64): download e novità

http://i47.fastpic.ru/big/2013/0501/bc/b0e1ba22421f9bb9dcd5ab3e4f1723bc.jpg

RARLAB ha rilasciato pochissimi giorni fa la prima versione beta del prossimo gestore di archivi WinRAR 5.0.

Per chi non lo conoscesse, ricordiamo che WinRAR è probabilmente uno di quei software che tutti abbiamo installato sul nostro computer o che comunque abbiamo provato almeno una volta. Questa utility per la compressione di file e la gestione di archivi ha sempre riscosso un grandissimo successo, non solo per le numerose features messe a disposizione, ma anche e soprattutto per le performance ottimizzate anche per Processori Multi-Core.

Oggi vi segnaliamo che l’utility ha ricevuto un importante aggiornamento con la versione 5.0 Beta, release che introduce il nuovo formato RAR5 (non retrocompatibile però), capace di utilizzare dizionari di compressione fino a 1GB nella versione a 64 bit e fino a 256 MB in quella a 32 bit. Altre ottimizzazioni sono state effettuate per quanto riguarda il supporto Multi-Core e la gestione degli archivi corrotti.

La nuova versione è disponibile per il download gratuito direttamente sul sito ufficiale dell’azienda nella versione a 32-bit e 64-bit per il sistema operativo Windows (solo in lingua inglese al moemnti).

Le nuove funzionalità introdotte con questo update sono davvero tantissime, anche se probabilmente la più grande novità di questa versione di WinRAR è il nuovo formato di archivio RAR 5.0.

Cosa significa concretamente questo?

Questo significa che con WinRAR 5.0 gli utenti hanno la possibilità di creare archivi RAR standard, ma anche archivi che fanno uso del nuovo algoritmo di compressione. Questa novità è molto importante perchè, almeno in un primo momento, i programmi di terze parti potrebbero non supportare il nuovo formato di destra quando si esce. Chiaramente in futuro le cose si sistemeranno, ma servirà del tempo per fare digerire questa grossa novità agli sviluppatori dei vari software. Ad esempio, al momento attuale, gli utenti 7-Zip che tentano di estrarre un archivio RAR 5 riceveranno il messaggio di errore che comunica che non è possibile aprire il file o che l’archivio è danneggiato.

Purtroppo al momento non vi è alcun indicatore che mostra se i dati sono stati compressi con RAR o RAR 5, quindi è probabile che almeno alcuni utenti potrebbero incorrere in problemi quando tentano di aprire questi nuovi formati. Come detto, si tratta di un problema momentaneo, che sarà presto risolto con i futuri update dei software di terze parti che si integrano con WinRAR.

RARLABS, comunque, ha creato una nota tecnica che descrive il nuovo formato RAR 5.0 in dettaglio.

Se siete interessati a provare il nuovissimo WinRAR 5.0, sappiate che al momento è possibile scaricare una versione beta della prossima applicazione WinRAR 5.0 dal sito dello sviluppatore. Essendo una beta, è completamente gratuita e non richiede alcuna attivazione.

WinRAR 5.00 Beta 1 (x86/x64)

What’s New:

  • New RAR 5.0 archiving format. You can use “RAR 5.0” option in archiving dialog or -ma command line switch to create RAR 5.0 archives. Older software including older WinRAR versions is not able to decompress RAR 5.0 archives, so if you plan to send an archive to other people, it is necessary to take the compatibility issue into consideration. You can select “RAR” instead of “RAR5” option in archiving dialog to create RAR 4.x archives compatible with previous WinRAR versions.
  • Changes in RAR 5.0 compression algorithm:
    • maximum compression dictionary size is increased up to 1 GB in 64 bit WinRAR. 32 bit WinRAR version can use up to 256 MB dictionary when creating an archive. Both 32 bit and 64 bit versions can unpack archives with any dictionary size, including 1 GB;
    • default dictionary size for RAR 5.0 is 32 MB, typically resulting in higher compression ratio and lower speed than RAR 4.x 4 MB. You can use “Dictionary size” archiving dialog option or -md switch to change this value;
    • -md switch syntax is modified to support larger dictionary sizes. Append ‘k’, ‘m’ and ‘g’ modifiers to specify the size in kilo-, mega- and gigabytes, like -md64m for 64 MB dictionary. If modifiers are not present, megabytes are assumed, so -md64m is equal to -md64;
    • RAR 5.0 format includes Intel IA-32 executable and delta compression algorithms, but RAR 4.x text, audio, true color and Itanium algorithms are not supported. These excluded algorithms are not efficient for modern data types and hardware configurations;
    • RAR 5.0 decompression can utilize several CPU cores. Though not to same extent as in compression algorithm, it improves the decompression speed on large files with poorly compressible data or when using BLAKE2 checksums.
  • Changes in RAR 5.0 archive format:
    • file times are stored as Coordinated Universal Time (UTC) instead of former local time, making file exchange among several time zones more straightforward;
    • file names and archive comments use UTF-8 encoding.
  • RAR 5.0 recovery record is based on Reed-Solomon error correction codes. If recovery record size is large enough, 5% and more, the new error correction scheme provides much higher resistance to multiple damages comparing to RAR 4.x recovery record. Smaller record, such as 1 – 2%, or less random damage type would result in less difference between 4.x and 5.0. For single continuous damage 4.x and 5.0 efficiency is about the same.
    • Additionally to usual data erasures, the new recovery record is able to detect deletions and insertions of much larger size than in previous RAR versions. Maximum insertion size is several megabytes. Maximum deletion size depends on the damage type and in some cases can be as large as the recovery record size. Still, the best recovery performance and efficiency is achieved if no deletions and insertions are present, so all data including damaged sectors preserve their original positions. Thus, if you use some special software to copy an archive from damaged media, it is better to choose the mode, when damaged sectors are filled by zeroes or any other data instead of cutting them out completely from resulting file. RAR 5.0 recovery record is more resistant to damage of recovery record itself and can utilize a partially corrupt recovery record data. Note, though, that “Repair” command does not fix broken blocks in recovery record. Only file data are corrected. After successful archive repair, you may need to create a new recovery record for saved files.
    • New recovery record is not based on 512 byte sectors anymore and incorporates more complicated data structures. So it is impossible to specify its size in sectors. For RAR 5.0 archives the parameter of -rr[N] switch and rr[N] command is always treated as a percent of archive size regardless of presence of % character. Typically N% recovery record can repair up to N% of continuously damaged data and increases the archive size by only slightly more than N%. Ability to fix multiple damages is proportional to N. We used “Screaming Fast Galois Field Arithmetic Using Intel SIMD Instructions” paper by James S. Plank, Kevin M. Greenan and Ethan L. Miller to improve Reed-Solomon coding performance. Also we are grateful to Artem Drobanov and Bulat Ziganshin for samples and ideas allowed to make Reed-Solomon coding more efficient.
  • “Test” command verifies validity of RAR 5.0 recovery record. Recovery record is tested after processing all archived files.
    • If corrupt archive contains the recovery record, it might be possible to repair it even if recovery record validity test is failed. “Repair” command attempts to utilize even a partially damaged recovery record. So treat the negative recovery record test result as a reason to re-create the archive if original files are still available, but not as a reason to avoid “Repair” command.
  • Changes in RAR 5.0 encryption algorithm:
    • encryption algorithm is changed from AES-128 to AES-256 in CBC mode. Key derivation function is based on PBKDF2 using HMAC-SHA256;
    • special password verification value allows to detect most of wrong passwords without necessity to unpack the entire file;
    • if archive headers are not encrypted (“Encrypt file names” option is off), file checksums for encrypted RAR 5.0 files are modified using a special password dependent algorithm, to make impossible guessing file contents based on checksums. Do not expect such encrypted file checksums to match usual CRC32 and BLAKE2 values.
  • RAR 5.0 archives allow to utilize 256 bit length BLAKE2sp hash ( https://blake2.net ) instead of 32 bit CRC32 as a file checksum. Enable “Use BLAKE2 file checksum” option in “Options” page of archiving dialog or specify -htb command line switch to use BLAKE2 checksums.
    • While producing slightly larger archives, BLAKE2 can be used for file contents identification. If two files have the same BLAKE2 value, it practically guarantees that file contents is the same. BLAKE2 error detection property is also stronger than in much shorter CRC32.
  • Features removed:
    • authenticity verification feature did not provide the required level of reliability and was removed;
    • switch -en (do not add “end of archive” block) is not supported by RAR 5.0 archives, which always have the end of archive block.
    • This block helps WinRAR to safely skip external data like digital signatures appended to archive;
    • old style extension based arcname.rNN volume names are not supported by RAR 5.0 archives, which use only arcname.partN.rar volume names;
    • file comments are not supported anymore both in RAR 4.x and RAR 5.0 archives. Console RAR ‘cf’ command is removed. It does not affect the archive comment support, which is present in both versions of archive format and is not planned for removal.
  • “Set password” command and “Dictionary size” option are moved to “General” page of archiving dialog.
  • You can use “Save symbolic links as links” option on “Advanced” page of archiving dialog to save and restore NTFS symbolic links and reparse points as links, so their contents is not archived. Command line equivalent of this option is -ol switch. Similar option for NTFS hard links is “Save hard links as links”. Its command line equivalent is -oh switch. Both options are available only for RAR 5.0 archive format.
  • Added extraction only support for XZ archive format.
  • Changes in recovery volume processing in RAR 5.0 archive format:
    • maximum number of RAR+REV volumes in RAR 5.0 format is 65535 instead of 255;
    • recovery volume operations are faster than in RAR 4.x;
    • additionally to recovery data, RAR 5.0 REV files also store service information such as checksums of protected RAR files. So they are slightly larger than RAR volumes which they protect. If you plan to copy individual RAR and REV files to some removable media, you need to take it into account and specify RAR volume size by a few kilobytes smaller than media size.
  • Maximum path length for files in RAR and ZIP archives is increased up to 2048 characters.
  • Command line RAR returns the exit code 11 if it can detect that user entered a wrong password. This code can be returned only for RAR 5.0 archives. It is impossible to distinguish a wrong password and data damage for RAR 4.x archives.
  • ‘v’ and ‘l’ commands display archived file names in the end of line, not in that beginning as before. Also some fields previously available in ‘l’ and ‘v’ output are now shown only by ‘lt’ and ‘vt’.
    • ‘vt’ and ‘lt’ commands provide the detailed multiline information for every archived file. ‘vta’ and ‘lta’ also include service headers into list.
  • Now the default charset for filelists in commands like ‘rar a arcname @filelist’ is ANSI for both WinRAR and console RAR. In previous versions it was ANSI for WinRAR and OEM for console RAR. You can use -scl switch to override this default.
  • Internal WinRAR viewer can detect and display files in UTF-8 and UTF-16 little endian encodings.
  • UTF-16 little endian encoding is used in RAR and WinRAR log file rar.log, so Unicode file names are stored in the log correctly. WinRAR automatically truncates the old rar.log file in non-Unicode format to avoid mixing different encoding in the same log file. In case of console RAR you need to delete the old rar.log manually, otherwide RAR will append UTF-16 messages to existing rar.log.
  • Command line ‘r’ (repair) command can include an optional destpath parameter defining the destination folder for repaired archive: rar r archive.rar destpath

Aspetta..Prima di lasciare la pagina leggi qui

UNISCITI AL NOSTRO GRUPPO DELLE OFFERTE TECH SU TELEGRAM. OGNI GIORNO TROVI OFFERTE SUPER, SELEZIONATE UNA AD UNA

YOURLIFEUPDATED È STATO SELEZIONATO DAL NUOVO SERVIZIO DI GOOGLE NEWS: se vuoi essere sempre aggiornato sulle nostre notizie SEGUICI QUI

YOURLIFEUPDATED HA UN CANALE TELEGRAM CHE RACCOGLIE TUTTE LE ULTIME NOTIZIE: se vuoi essere sempre aggiornato SEGUICI QUI

YOURLIFEUPDATED HA UN CANALE YOUTUBE CON OLTRE 2500 ISCRITTI, UNISCITI ANCHE TU: se vuoi essere sempre aggiornato SEGUICI QUI

HAI BISOGNO DI ASSISTENZA? Unisciti al nostro Gruppo di supporto - CLICCA QUI

NON HAI ANCORA AMAZON PRIME? Attivalo gratis ORA - CLICCA QUI

CERCHI LE MIGLIORI OFFERTE DI AMAZON? Scoprile QUI sempre aggiornate

In qualità di Affiliato Amazon io ricevo un guadagno dagli acquisti idonei

LASCIA UN COMMENTO

Per favore inserisci il tuo commento!
Per favore inserisci il tuo nome qui